Used Plastic Injection Moulding Machine | Yashuka Machinery
Used Plastic Injection Moulding Machine | Yashuka Machinery
Used Plastic Injection Moulding Machine: Complete Guide 2026 & 2027
Yashuka Machinery brings you a wide range of inspected, production-ready used plastic injection moulding machines, sourced and refurbished to serve manufacturers across India's automotive, packaging, consumer goods, and electronics sectors. Since 2012, Yashuka Machinery has built its reputation on supplying dependable second hand plastic injection moulding machines that combine proven performance with significant cost savings compared to buying new equipment.
Every machine listed goes through a structured, multi-point inspection covering the hydraulic system, electrical panel, screw and barrel condition, clamping unit alignment, and a live trial run before it reaches your facility. This process ensures buyers receive a refurbished injection moulding machine that is genuinely ready for production, not just cosmetically cleaned equipment.
Our stock includes machines across tonnage ranges from 50 tons to 500+ tons, sourced from trusted global brands including Toshiba, Nissei, JSW, Sumitomo, Engel, and Husky. For manufacturers seeking exceptional build quality and longevity, our selection of used Japanese plastic injection moulding machines offers an ideal balance of precision engineering and long-term reliability, often with 10-15 years of remaining service life when properly maintained.
Buying used or refurbished machinery through Yashuka Machinery means lower capital investment, faster availability compared to new machine lead times, and access to technical support before and after your purchase. We assist customers with tonnage selection based on their application, provide transparent pricing, and support logistics and installation, whether you are located in Delhi/NCR or anywhere else in India.
Whether you are a growing MSME unit looking to expand capacity, or an established manufacturer adding a second production line, our range of used and refurbished injection moulding machines is built to help you scale production without overextending your budget.
What Is a Used Plastic Injection Moulding Machine and How Does It Work?
A used plastic injection moulding machine is a previously operated machine that melts plastic granules and injects the molten material into a mould cavity under high pressure to form finished plastic parts. The machine completes this in three core stages: clamping (the mould closes and locks), injection (molten plastic is forced into the mould through a screw-driven barrel), and ejection (the cooled part is pushed out and the cycle repeats).
Unlike a brand-new unit, a used machine has already completed thousands of production cycles, which means its performance data, wear patterns, and reliability are known and verifiable — not theoretical. When sourced from a trusted supplier, this track record works in the buyer's favour rather than against it.
Why Used Plastic Injection Moulding Machines Are in Demand in the Indian Market
Indian manufacturers, especially in the MSME and mid-scale plastic processing sector, are increasingly choosing a refurbished plastic injection moulding machine over a new one for practical, budget-driven reasons.
- Lower capital investment – A used machine typically costs 40-60% less than a comparable new machine, freeing up capital for moulds, raw material, and manpower.
- Faster ROI – Lower purchase price means the machine pays for itself sooner, especially useful for job-work units and startups testing new product lines.
- Proven Japanese and European engineering – Machines from established global brands are built for 15-20+ years of service life, so a used unit still has substantial working life left.
- No steep depreciation loss – New machines lose significant value in the first year itself; a well-maintained used machine holds its resale value better.
- Immediate availability – New machines can involve long manufacturing lead times; used machines are often ready for dispatch within days.
- Lower GST and import duty exposure on domestically available refurbished stock compared to freshly imported new machines.
For growing plastic processing units, this combination of lower cost and dependable output makes used machinery a financially sound decision rather than a compromise.
New vs. Used Plastic Injection Moulding Machine: Which Should You Buy?
| Customization | Use Case |
|---|---|
| Logo Embossing / Foil Stamping | Executive gifting, dealer meets |
| Debossing / UV Printing | Premium brand merchandising |
| Personalized Name Printing | Employee welcome kits |
| Custom Inner Pages & Inserts | Onboarding kits, franchise gifting |
| Gift Box Packaging | Client and partner gifting |
| Multiple Cover Materials (PU Leather, Linen, Acrylic-Coated) | Matching brand tone — executive vs. everyday |
Verdict: If your priority is quick deployment, lower investment, and proven reliability from brands like Toshiba, Nissei, or Sumitomo, a used machine is the smarter buy. If you need the latest energy-saving servo technology and have a large capital budget, a new machine may suit better. Most Indian processors, however, find that a professionally inspected used machine delivers 90% of new-machine performance at a fraction of the cost.
Used Plastic Injection Moulding Machine Price in India
Pricing depends primarily on tonnage (clamping force), brand, year of manufacture, and condition. Below is an indicative price range to help you budget accurately.
Price by Tonnage (Comparison Table)
| Tonnage Range | Typical Application | Approximate Price Range (INR) |
|---|---|---|
| 50–100 Ton | Small components, caps, connectors | ₹3,00,000 – ₹7,00,000 |
| 100–200 Ton | Household items, packaging parts | ₹6,00,000 – ₹14,00,000 |
| 200–350 Ton | Automotive parts, appliance housings | ₹12,00,000 – ₹28,00,000 |
| 350–500 Ton | Larger automotive and industrial parts | ₹22,00,000 – ₹45,00,000 |
| 500 Ton and Above | Heavy industrial and automotive assemblies | ₹40,00,000 and above |
Prices vary based on brand, machine condition, control system, and auxiliary equipment included. Contact Yashuka Machinery for an exact, current quotation.
Factors That Affect Used Machine Pricing
- Brand and country of origin — Used Japanese plastic injection moulding machines from Toshiba, Nissei, JSW, and Sumitomo command a premium due to build quality and longevity.
- Year of manufacture and total running hours
- Condition of the screw, barrel, and hydraulic system
- Availability of spare parts for the specific model
- Control system type — PLC-based or microprocessor-based controls
- Included auxiliary equipment such as hoppers, dryers, and mould temperature controllers
- Refurbishment level — cosmetic cleaning versus full mechanical and electrical overhaul
How to Inspect a Used Plastic Injection Moulding Machine Before Purchase
A structured inspection protects your investment and prevents costly downtime after installation. Yashuka Machinery performs this exact process on every machine before listing it for sale.
Checklist: What to Inspect Before Buying
- Machine service and maintenance history
- Physical frame and structural condition
- Screw and barrel wear
- Clamping unit alignment
- Electrical panel and wiring condition
- Hydraulic pump and cylinder performance
- Live trial run under load
Documentation and Service History
Ask for the machine's maintenance logs, previous ownership details, and any past breakdown or repair records. A machine with documented, regular servicing is far less likely to carry hidden faults than one with no paperwork.
Physical and Structural Inspection
Inspect the machine bed, tie bars, and frame for cracks, corrosion, or misalignment. Tie bars should be free of pitting and show even wear, indicating the clamping force has been applied evenly over the machine's life.
Injection Unit Inspection
Examine the screw and barrel for wear, scoring, or excessive play. A worn screw reduces shot consistency and increases cycle time, so this is one of the highest-value checks in the entire process.
Clamping Unit and Ejector System
Check that the mould clamping mechanism locks smoothly and holds pressure without drift. Test the ejector pins and plate for smooth, synchronized movement without binding.
Electrical and Control System Checks
Verify that all sensors, limit switches, heaters, and the control panel respond accurately. Faulty wiring or an outdated control board can be expensive to replace, so confirm this before finalizing the deal.
Hydraulic System Checks
Check hydraulic oil condition, pump noise levels, and cylinder seals for leaks. Clean, contamination-free hydraulic oil is a strong indicator of consistent past maintenance.
Test Run and Trial Evaluation
Always request a live trial run with an actual mould, if possible. Observe cycle time consistency, shot repeatability, temperature stability, and noise levels during operation before making a final decision.
Maintenance Tips to Increase the Life of a Used Plastic Injection Moulding Machine
Consistent maintenance is what separates a used machine that runs reliably for another decade from one that breaks down within months.
- Daily Maintenance - Check hydraulic oil levels, clean the mould surface, and inspect for unusual noise or vibration before starting production.
- Weekly Maintenance - Inspect heater bands, thermocouples, and safety guards. Clean the hopper and dryer unit to prevent material contamination.
- Monthly Maintenance - Check hydraulic filters, tighten loose electrical connections, and inspect the screw tip and non-return valve for wear.
- Quarterly Maintenance - Test the clamping unit alignment, inspect tie bar lubrication, and calibrate temperature sensors for accuracy.
- Annual Maintenance - Conduct a complete hydraulic oil change, full electrical panel inspection, and structural check of the machine frame and tie bars.
- Operator Training and Documentation - Train operators on correct startup and shutdown sequences, and maintain a logbook for every maintenance activity. Proper documentation helps identify recurring issues early and supports better resale value later.
Common Problems in Used Plastic Injection Moulding Machines and How to Avoid Them
- Inconsistent Shot Size - Usually caused by worn screw and barrel components or air trapped in the hydraulic system. Regular screw inspection and hydraulic bleeding prevent this.
- Short Shots - Occurs when insufficient material reaches the mould cavity, often due to low injection pressure or a worn non-return valve. Timely valve replacement resolves this.
- Flash or Excess Material - Caused by insufficient clamping force or worn mould surfaces. Verify clamping tonnage matches the mould requirement before production.
- Burn Marks on Parts - Typically caused by trapped air or excessive barrel temperature. Proper venting and temperature calibration solve this issue.
- Hydraulic Oil Leaks - Result from worn seals or damaged hoses. Routine seal inspection during quarterly maintenance prevents unexpected downtime.
- Control System Failures - Often linked to outdated wiring or moisture damage in the electrical panel. Keep the control cabinet clean, dry, and regularly inspected.
- Uneven Mold Wear - Caused by misaligned clamping units. Periodic alignment checks extend both machine and mould life.
- Temperature Fluctuations - Faulty thermocouples or heater bands are the usual culprits. Replace damaged sensors promptly to maintain part quality.
- Contamination Issues - Occurs when raw material is exposed to dust or moisture. Use a proper hopper dryer and store material correctly.
- Excessive Cycle Time Variations -Usually a sign of hydraulic pump wear or inconsistent oil pressure. Regular pump servicing keeps cycle times stable and predictable.
Myths and Facts About Used Plastic Injection Moulding Machines
| Myth | Fact |
|---|---|
| Used machines break down frequently | A professionally inspected refurbished injection moulding machine can perform reliably when properly maintained. |
| Used machines have outdated technology | Many used machines feature PLC-based control systems comparable to those found in current models. |
| Buying used means no warranty or support | Reputable suppliers such as Yashuka Machinery may provide inspection warranties and after-sales support. |
| Spare parts are hard to find for used machines | Popular brands such as Toshiba, Nissei, and Sumitomo have widely available spare parts in India. |
| Used machines consume more power | Power consumption depends on factors such as maintenance, hydraulic condition, motor efficiency, and screw condition—not machine age alone. |
| Resale value drops to zero over time | Well-maintained used machines can retain significant resale value, particularly established Japanese brands. |
Common Applications of Used Plastic Injection Moulding Machines
- Automotive Industry - Manufacturing dashboard components, bumpers, connectors, and interior trim parts at scale with consistent tolerances.
- Consumer Goods Manufacturing - Producing household items, containers, furniture components, and toys with high repeatability.
- Packaging Industry - Creating caps, closures, crates, and containers where cycle speed and dimensional accuracy directly affect output volume.
- Medical and Pharmaceutical Industry - Producing syringe components, packaging, and non-critical medical device parts using precision-controlled machines.
- Electronics Manufacturing - Moulding connector housings, switch bodies, and casing components that require tight tolerances.
- Construction and Hardware - Manufacturing pipe fittings, fasteners, and hardware components for the building materials sector.
- Agricultural Sector - Producing irrigation fittings, containers, and equipment components suited to rugged, outdoor use.
What Brands Offer Durable Used Plastic Injection Moulding Machines
Japanese Manufacturers - Toshiba, Nissei, JSW, Sumitomo, and Niigata are widely regarded as the gold standard. Used Japanese plastic injection moulding machines are known for precision engineering, longer service life, and strong resale value in the Indian market.
European Manufacturers - Engel, Krauss Maffei, and Arburg offer high-precision engineering suited to demanding automotive and medical applications.
American Manufacturers - Husky and Cincinnati Milacron machines are known for robust build quality and durability in heavy-duty applications.
Asian Manufacturers (Outside Japan) - Chen Hsong and Fu Chun Shin from Taiwan and Hong Kong offer a solid balance of cost-efficiency and reliable performance.
Indian Manufacturers -Windsor, Electronica, and L&T machines are popular for their local spare part availability and lower maintenance costs.
Where to Buy a Used Plastic Injection Moulding Machine in Delhi/NCR
Delhi/NCR is one of India's largest hubs for plastic processing and moulding equipment trade, making it the ideal location to source a used plastic injection moulding machine with easy access to inspection, spare parts, and technical support. Yashuka Machinery operates directly from this region, offering buyers the advantage of physical machine inspection, local installation support, and faster delivery timelines compared to sourcing from distant states or importing directly.
Yashuka Machinery: Trusted Used Plastic Injection Moulding Machine Supplier in Delhi Since 2012
Since 2012, Yashuka Machinery has supplied refurbished injection moulding machines and auxiliary equipment to manufacturers across India. Every machine undergoes a documented multi-point inspection covering hydraulic, electrical, and structural condition before it is listed for sale, so buyers receive verified, production-ready equipment rather than an unchecked second-hand unit.
Our team assists customers through the entire process — machine selection based on tonnage and application, technical clarification, logistics, and post-installation support. This hands-on approach has made Yashuka Machinery a dependable name for manufacturers who need working capital efficiency without compromising on machine performance.
Ready to upgrade your production line? Contact Yashuka Machinery today to check current stock, get a tonnage-wise quotation, and schedule a machine inspection.
Frequently Asked Questions
What is the difference between a used and refurbished machine?
A used machine is sold largely as-is with minimal intervention, while a refurbished injection moulding machine has undergone inspection, repair, and reconditioning of key components such as the hydraulic system, screw, and electrical panel before resale.
How long does a used injection moulding machine last?
A well-maintained used machine, particularly from Japanese or European brands, can run reliably for another 10-15 years, depending on usage intensity and maintenance quality.
Do you offer warranty on used machines?
Yes, Yashuka Machinery provides an inspection-backed warranty period on machines purchased through us, covering major mechanical and electrical components.
Can I get financing for a used machine?
Financing options can be discussed on a case-by-case basis depending on the machine value and buyer requirements. Contact our team to discuss available options.
Do you deliver outside Delhi?
Yes, Yashuka Machinery arranges delivery and logistics support for buyers across India, not just within Delhi/NCR.
Contact Yashuka Machinery For Used Plastic Injection Moulding Machine At Best Price in Delhi
Choosing a used plastic injection moulding machine is no longer a compromise — for many Indian manufacturers, it is the smarter, more financially sound decision. With proper inspection, documented maintenance history, and support from a trusted supplier, a second hand plastic injection moulding machine can deliver near-new performance at a significantly lower investment, freeing up capital for moulds, raw material, and business growth.
Throughout this guide, we've covered what to check before buying, how pricing varies by tonnage and brand, common issues to watch for, and the maintenance practices that extend a machine's working life by years. Whether you're evaluating a refurbished injection moulding machine for the first time or expanding an existing production line, the key to a successful purchase lies in verified inspection, transparent documentation, and ongoing maintenance support.
For manufacturers who value precision and longevity, used Japanese plastic injection moulding machines remain among the most reliable options in the market, backed by decades of proven engineering. Yashuka Machinery has spent over a decade helping Indian businesses make this exact decision with confidence, offering inspected machines, transparent pricing, and complete after-sales support.
If you're ready to add production capacity without the cost and wait time of new machinery, now is the right time to explore our current stock. Get in touch with Yashuka Machinery to check tonnage availability, request a detailed quotation, and schedule a machine inspection — our team is ready to help you move from inquiry to installation quickly and reliably.
Get in touch today for current machine availability, tonnage-wise pricing, and a free technical consultation before you buy. Our team is ready to help you select the right Imported Plastic Injection Moulding Machine for your production requirement and arrange delivery, installation, and after-sales support.
