Plastic Injection Moulding Machine Price in India (2026): Cost by Tonnage, Type and Where to Buy
Plastic Injection Moulding Machine Price in India (2026): Cost by Tonnage, Type and Where to Buy
Plastic Injection Moulding Machine Price in India (2026): Buy New, Used or Refurbished At Best Price in Delhi - Yashuka Machinery
A new plastic injection moulding machine in India costs roughly ₹8 lakh to ₹3 crore+, depending on tonnage, brand and control system. Used and refurbished Japanese, German and Taiwanese machines cost 30 to 60% less. Yashuka Machinery, Delhi, supplies inspected, ready-to-run machines from 50 to 1,500+ tonnes.
Quick answer: A plastic injection moulding machine melts plastic granules and injects them into a mould to form finished parts. In India, a 100-tonne machine typically costs ₹10 to 18 lakh new and ₹6 to 12 lakh refurbished.
Plastic Injection Moulding Machine Price in India: Quick Overview
Prices start near ₹8 lakh for a small 50-tonne machine and exceed ₹3 crore for large units above 1,000 tonnes. Clamping force is the biggest price factor, followed by brand, age and control technology.
Average Price at a Glance
These ranges are indicative for 2026, exclude GST and change with exchange rates, condition and specification.
| Clamping Force | New Machine (₹ Lakh) | Used / Refurbished Imported (₹ Lakh) | Typical Products |
|---|---|---|---|
| 50 to 100 Tonnes | 8 to 20 | 4 to 12 | Caps, closures, small housings |
| 120 to 250 Tonnes | 18 to 50 | 10 to 30 | Crates, buckets, auto parts |
| 300 to 500 Tonnes | 45 to 120 | 25 to 70 | Chairs, large containers, panels |
| 550 Tonnes and Above | 100 to 300+ | 50 to 180 | Furniture, bumpers, pallets, tubs |
Why Prices Vary So Much Between Machines
Two machines of the same tonnage can differ in price by 2 to 3 times. Five factors cause the gap:
- Brand and country of origin: Japanese and European machines cost more than Indian and Chinese equivalents.
- Drive technology: Electric and servo-hydraulic models cost more than standard hydraulic models.
- Machine age and hours: Lower running hours raise the price of used machines.
- Controller and automation: Advanced controllers, robots and sensors add cost.
- Condition: A fully refurbished plastic injection moulding machine costs more than an as-is machine, but it saves repair costs later.
Need a price for your exact tonnage?
Injection Moulding Machine Price by Tonnage
Clamping tonnage is the force that keeps the mould closed during injection. Higher tonnage means a larger platen, a bigger frame and a higher price. Match tonnage to your part size, because oversizing wastes capital and power.
Small Machines (50 to 100 Tonnes) Price
Small machines make caps, closures, medical parts and electrical components. New units cost about ₹8 to 20 lakh, and refurbished imported units cost about ₹4 to 12 lakh. They suit startups and first-time buyers because they use less power and floor space.
Medium Machines (120 to 250 Tonnes) Price
This range is the most popular among Indian processors. It handles household products, auto components, crates and pipe fittings. Expect ₹18 to 50 lakh new and ₹10 to 30 lakh refurbished. A used Japanese 150-tonne machine often gives the best balance of price and reliability.
Large Machines (300 to 500 Tonnes) Price
Large machines produce chairs, large containers, appliance panels and automotive interiors. New models cost ₹45 to 120 lakh, while refurbished imported machines cost ₹25 to 70 lakh. At this size, a refurbished machine can save you ₹20 lakh or more.
Extra-Large Machines (550 Tonnes and Above) Price
Machines above 550 tonnes make bumpers, pallets, dustbins and large furniture parts. New machines start near ₹1 crore and rise past ₹3 crore, and refurbished units cost ₹50 to 180 lakh depending on brand and age. Yashuka Machinery supplies machines up to 1,500+ tonnes.
Plastic Injection Moulding Machine Price by Type
The drive system decides both the purchase price and the running cost. Hydraulic machines cost least to buy, electric machines cost most to buy but least to run, and hybrid machines sit in between.
| Machine Type | Price vs. Hydraulic | Best For |
|---|---|---|
| Hydraulic | Baseline (lowest) | General products and tight budgets |
| Hybrid (Servo-Hydraulic) | 15 to 30% higher | Multi-shift plants and energy savings |
| All-Electric | 30 to 60% higher | Precision manufacturing, medical products, and electronics |
- Hydraulic Injection Moulding Machine Price - Hydraulic machines use pumps and oil to generate force. They are the cheapest to buy and the easiest to repair. Choose hydraulic if your budget is tight and your parts are not highly precise.
- Electric Injection Moulding Machine Price - Electric machines use servo motors for every movement. They give high precision, quiet operation and lower energy use, which suits medical, electronics and optical parts.
- Hybrid (Servo-Hydraulic) Injection Moulding Machine Price - Hybrid machines pair a servo motor with a hydraulic pump. They can cut energy use substantially, with savings that depend on your cycle and product. Most Indian processors running multiple shifts find the payback worthwhile.
- Vertical Injection Moulding Machine Price - Vertical machines clamp and inject in a vertical line. They suit insert moulding and over-moulding, such as connectors and plugs. Their price per tonne is usually higher than horizontal machines because of the niche design.
- Toggle vs Two-Platen Machine Price Difference - Toggle machines use a mechanical linkage to close the mould, and they dominate the small and medium range. Two-platen machines use hydraulic cylinders and suit very large tonnage with big moulds. Two-platen models cost more, but they save floor space and open wider for large tools.
Price by Brand: Indian, Chinese, Japanese and European Manufacturers
Brand origin shapes both the purchase price and the resale value. Japanese and European machines cost more, but they hold value and run for decades.
- Indian Brands Price Range - Indian manufacturers offer competitive prices and local spare parts. They suit buyers who want a new machine with a domestic service network. Prices sit at the lower end of the new-machine ranges above.
- Chinese Brands Price Range - Chinese machines such as Haitian offer low entry prices and fast delivery. Quality has improved sharply in recent years. Check service coverage and spare-part availability in your region before ordering.
- Japanese and European Brands Price Range - Japanese brands (Fanuc, Sumitomo, Toshiba, Nissei) and European brands (Engel, Arburg, KraussMaffei) cost the most when new. Their refurbished versions give you the same build quality at a much lower price. Taiwanese brands such as FCS sit between Chinese and Japanese machines on price.
Top Brands to Look for in the Market
Yashuka Machinery supplies:
- Fanuc: all-electric precision machines
- Sumitomo: high-speed electric and hybrid models
- Toshiba: durable hydraulic and servo machines
- Engel and Arburg: premium European machines
- FCS and Haitian: value-for-money Taiwanese and Chinese machines
Why Indian Manufacturers Trust Imported Injection Moulding Machines
Imported machines offer tighter process control, lower scrap rates and longer service life. A refurbished imported plastic injection moulding machine gives a small or mid-size processor access to premium technology at a manageable cost. That is why demand for used Japanese injection moulding machines keeps growing.
New vs Used Injection Moulding Machine Price
A used or refurbished machine usually costs 30 to 60% less than a new one of similar specification. The saving is real only when the machine is properly inspected and refurbished.
Price Difference Between New and Second-Hand Machines
A new 150-tonne machine may cost ₹25 to 35 lakh, while a refurbished imported 150-tonne machine may cost ₹12 to 20 lakh. The difference funds your moulds, auxiliaries and working capital.
| Factor | New Machine | Refurbished from Yashuka |
|---|---|---|
| Upfront Price | Highest initial investment | 30 to 60% lower |
| Delivery Time | Often weeks to months | Ready stock and faster dispatch |
| Inspection Before Buying | Not usually possible before production or delivery | Visit our Delhi facility to inspect the machine |
| Brand Access | Limited by budget | Access to Japanese and European brands |
| Installation and Training | Support varies by supplier | On-site support, including installation and training, as offered |
Why Used Japanese Injection Moulding Machines Are in High Demand
Japanese machines are known for precision, strong frames and long life. Many are replaced early in Japan because of company upgrade cycles, not because of wear. That gives Indian buyers well-maintained machines with plenty of useful life left.
When Buying a Used Machine Makes Sense
A used machine makes sense when you:
- Launch a new product line with limited capital
- Need a machine delivered quickly
- Want Japanese or European quality at a lower price
- Add capacity before the market is proven
Risks to Check Before Buying a Used Machine
Check these ten points during inspection:
- Screw and barrel wear
- Check-ring and non-return valve condition
- Hydraulic pump and valve performance
- Tie-bar and platen condition
- Toggle or clamp-system wear
- Controller and display function
- Servo motor and drive health (electric machines)
- Oil leaks and hose condition
- Heater bands and thermocouples
- Running hours and service history
At Yashuka Machinery, we inspect, test and refurbish every machine before delivery.
Maintenance Tips for Second-Hand Injection Moulding Machines
- Change hydraulic oil and filters on schedule
- Keep the oil cooler and chiller clean
- Lubricate tie-bars and toggle pins regularly
- Purge the barrel when changing materials
- Log shots, hours and faults for every machine
Key Factors That Affect Injection Moulding Machine Cost
Five factors drive almost the entire price. Knowing them helps you pay only for features you will use.
- Clamping Force and Shot Size - Higher clamping force and larger shot size mean a bigger machine and a higher price. Buy the tonnage your largest mould needs, plus a small safety margin.
- Brand and Country of Origin - Japanese and European brands cost more. Chinese and Indian brands cost less. Taiwanese brands sit in the middle.
- Control System and Automation Features - Modern controllers offer recipe storage, process monitoring and remote diagnostics. Robot interfaces and sensors raise the price, but they reduce labour and scrap.
- Energy Efficiency (Servo Motor Technology) - Servo-driven machines use less electricity because the motors run only when needed. They cost more upfront but cut power bills on long production runs.
- Customisation and Optional Accessories - Extra screw designs, larger platens, special barrels and hot-runner controllers all add cost. List your must-haves before you ask for quotes.
Hidden Costs Beyond the Machine Price
Budget an extra 25 to 50% of the machine price for the items below.
- Installation and Commissioning Charges - Foundation, levelling, electrical hook-up and test runs add cost. Yashuka Machinery provides on-site installation, commissioning and operator training.
- Moulds and Tooling Cost - Moulds can cost more than the machine itself for complex parts. Plan mould cost early, and confirm the mould fits the machine’s tie-bar spacing.
- Auxiliary Equipment (Chiller, Dryer, Hopper Loader, Robot) - Most plants need a chiller, a hopper dryer, a loader and often a take-out robot. Together these can add ₹2 to 15 lakh depending on machine size.
- Power Consumption and Running Cost - A 100-tonne hydraulic machine typically has a 15 to 25 kW motor. Servo and hybrid machines can cut electricity use considerably, which matters most when you run multiple shifts.
- Maintenance, Spare Parts and AMC - Plan an annual budget for oil, filters, heater bands and seals. An annual maintenance contract (AMC) gives predictable costs and faster response.
- GST, Freight and Import Duty - Add GST to every quoted price. Include freight from our Delhi facility to your plant. Yashuka Machinery quotes all charges in writing, with no hidden fees.
How to Choose the Right Plastic Injection Moulding Machine Before You Buy
Choose by tonnage first, then by machine type, then by total cost of ownership. Follow these four steps to avoid expensive mistakes.
Step 1: Calculate the Clamping Tonnage You Need
Required clamping force equals the projected area of all cavities multiplied by cavity pressure, plus a safety margin.
Formula: Clamping force (tonnes) = Projected area (cm²) × Cavity pressure (kg/cm²) ÷ 1,000 × Safety factor (1.1 to 1.2)
Worked example: Your mould has a total projected area of 200 cm², and the material needs a cavity pressure of 400 kg/cm². That gives 200 × 400 ÷ 1,000 = 80 tonnes. Multiply by 1.2 for safety to get 96 tonnes, so choose a 100-tonne machine.
Step 2: Match Machine Type to Your Product
- Packaging and thin-wall parts: high-speed electric or hybrid
- Household and general products: hydraulic or hybrid
- Precision and medical parts: all-electric
- Large furniture and crates: large hydraulic or two-platen
Step 3: Compare Total Cost of Ownership, Not Just Price
Add the purchase price, installation, moulds, auxiliaries, and five years of power and maintenance. A cheaper machine with high energy use can cost more over five years than a pricier servo machine.
Step 4: Check After-Sales Support and Spare Availability
Ask who will service the machine, how fast they respond and whether spares are in stock. A pan-India service network cuts downtime, and downtime is the most expensive cost in moulding.
Key Specifications to Check Before Buying (Checklist)
- Clamping force (tonnes)
- Shot size and injection pressure
- Screw diameter and L/D ratio
- Tie-bar spacing and mould thickness range
- Controller make and model
- Motor power (kW)
- Machine age and running hours
- Warranty and service terms
Common Mistakes to Avoid When Purchasing
- Buying by price alone
- Ignoring tie-bar spacing against mould size
- Skipping a test run
- Forgetting auxiliary equipment in the budget
- Choosing a supplier with no local service
Do’s and Don’ts When Buying Plastic Injection Moulding Machine
| Do | Don't |
|---|---|
| Inspect the machine in person. | Pay in full before inspection. |
| Ask for a test-run video or live trial. | Rely on photos alone. |
| Get a written quote with all charges. | Accept verbal prices without written confirmation. |
| Confirm spare parts availability. | Ignore the controller's age and compatibility. |
How to Buy from Yashuka Machinery: 5 Simple Steps
You can go from enquiry to a running machine in five steps.
- Send your requirement. Share your product, mould size, tonnage and budget by call, WhatsApp or email.
- Get a detailed quote. You receive a written quote within 24 hours.
- Inspect the machine. Visit our Mundka, Delhi facility and check the machine firsthand.
- Confirm and pay. Choose from our flexible payment options.
- Install and start. We deliver, install, commission and train your operators, then support you with spares and service.
Financing Options for Injection Moulding Machines in India
Most Indian buyers fund machines through a mix of bank finance, government-linked credit and supplier payment plans. Check current eligibility with your bank or consultant before applying.
- Bank Loans and Machinery Finance - Banks and NBFCs offer term loans against the machine itself. Typical tenures run three to seven years.
- Government Schemes and Subsidies (MSME, CLCSS, PMEGP) - PMEGP and MSME-linked credit support may apply to new manufacturing units. The Credit Linked Capital Subsidy Scheme (CLCSS) no longer accepts new applications. Speak to your local DIC or bank for current options.
- Leasing and EMI Options - Leasing and EMI plans reduce the upfront cash outlay. Yashuka Machinery offers flexible payment options. [CONFIRM: payment terms you can state publicly]
Is an Injection Moulding Machine a Good Investment? (ROI Snapshot)
An injection moulding machine can pay back in one to three years when it runs steady orders. The figures below are illustrative only, and your result depends on your product, orders and margins.
Sample Profit Calculation
| Item | Value |
|---|---|
| Machine and Mould Investment | ₹20 lakh |
| Monthly Material Processed | 8,000 kg |
| Conversion Margin | ₹30 per kg |
| Monthly Gross Margin | ₹2.4 lakh |
| Labour, Power and Upkeep | ₹1.2 lakh |
| Net Monthly Margin | ₹1.2 lakh |
| Payback Period | About 17 months |
Payback Period by Machine Size
| Machine Size | Typical Payback (Illustrative) |
|---|---|
| 50 to 100 Tonnes | 12 to 24 months |
| 120 to 250 Tonnes | 15 to 30 months |
| 300 Tonnes and Above | 18 to 36 months |
A refurbished machine shortens payback because the entry cost is lower.
Where to Buy Injection Moulding Machines in India
You can buy from manufacturers, authorised dealers or specialist importers and refurbishers. Choose based on whether you want a new or used machine, how fast you need it and what service you expect.
- Direct from Manufacturers - Buy direct for new machines with factory warranty. Expect longer lead times and fixed specifications.
- Authorised Dealers and Distributors - Dealers offer local support and sometimes demo units. Compare their service coverage before you commit.
- Top Manufacturing Hubs (Delhi NCR, Gujarat, Pune, Chennai) - Delhi NCR, Gujarat, Pune and Chennai host large clusters of plastics processors and machinery suppliers.
Buy Refurbished and Used Machines in Delhi
Yashuka Machinery stocks refurbished and used plastic injection moulding machines at its facility in Mundka Industrial Area, Delhi. Buyers from Bawana, Narela, Noida, Ghaziabad, Faridabad and across India can inspect machines firsthand before buying.
Our Delhi stock includes:
- Refurbished injection moulding machine in Delhi: inspected, tested and ready to run
- Second hand plastic injection moulding machine in Delhi: Japanese, German and Taiwanese brands
- Used Japanese plastic injection moulding machines in Delhi: Fanuc, Sumitomo, Toshiba and more
- Imported plastic injection moulding machine in Delhi: from 50 to 1,500+ tonnes
Why Choose Yashuka Machinery
Yashuka Machinery has supplied refurbished imported plastic injection moulding machines across India since 2012. Based in Delhi, we source machines from Japan, Germany, Taiwan and other leading manufacturing countries, then inspect, refurbish and deliver them ready to run.
- Experience since 2012: over a decade of sourcing and supplying imported machines
- Wide range: 50 to 1,500+ tonnes
- All major brands: Fanuc, Sumitomo, Toshiba, Engel, Arburg, FCS, Haitian and more
- Inspected and refurbished: every machine is tested before delivery
- Transparent pricing: no hidden charges
- Full support: on-site installation, commissioning and operator training
- After-sales service: spare parts assistance across India
- Flexible payment options
- Quote within 24 hours
How Plastic Injection Moulding Works (Quick Primer)
A plastic injection moulding machine has two main units. The injection unit melts plastic granules and injects them into a mould at high pressure. The clamping unit holds the mould closed during injection and cooling, then opens it so the finished part can eject.
This cycle repeats in seconds, which makes the process ideal for mass production of identical parts. Automotive, medical, packaging, electrical and household-goods makers all rely on it. Knowing which unit limits your output helps you read machine specs correctly when you compare quotes.
Frequently Asked Questions (FAQ)
What is the price of a 100-ton injection moulding machine in India?
A new 100-tonne machine costs roughly ₹10 to 18 lakh, and a refurbished imported one costs about ₹6 to 12 lakh. Final price depends on brand, age, controller and drive type. Contact Yashuka Machinery for a current quote.
What is the cheapest injection moulding machine available?
The cheapest options are small Indian or Chinese hydraulic machines of 50 to 80 tonnes, or used machines of similar size. A refurbished machine from a reliable supplier often gives better value than the lowest-priced new unit.
How much does an electric injection moulding machine cost compared to hydraulic?
An electric machine typically costs 30 to 60% more than a hydraulic one of equal tonnage. The higher price returns through lower energy use, better precision and cleaner operation.
Is a Chinese injection moulding machine worth buying?
Yes, for general-purpose moulding on a limited budget. Check local service, spare parts and controller support before you buy. Buyers who need very high precision often prefer Japanese or European machines.
Is a used Japanese injection moulding machine worth it?
Yes, when the machine is properly inspected and refurbished. Japanese machines have strong frames, precise controls and long service life. A refurbished Japanese machine usually costs far less than a new machine of similar quality.
How much power does an injection moulding machine consume?
A 100-tonne hydraulic machine typically runs a 15 to 25 kW motor, though actual use depends on cycle time and load. Servo-hydraulic and electric machines can use substantially less power.
What is the lifespan of an injection moulding machine?
A well-maintained machine can run 15 to 25 years or more. Regular oil changes, clean cooling and timely replacement of screws and barrels extend its life.
Can I get a subsidy on an injection moulding machine?
Some MSME and state schemes may offer support, depending on your location, unit type and category. CLCSS has ended for new applications. Check with your bank or local DIC for current options.
Get a Quote for Your Plastic Injection Moulding Machine
Choosing a plastic injection moulding machine is a large investment, and the right machine pays back for years. Compare price by tonnage, check the total cost of ownership and always inspect before you buy.
Yashuka Machinery has helped manufacturers across India find reliable refurbished and imported injection moulding machines since 2012. Our team inspects, refurbishes and delivers machines ready to run. We install them at your plant, train your operators and support you with spare parts after the sale.
Whether you need one machine for a new product line or a full fleet upgrade, we have the right machine at a transparent price. Our range covers 50 to 1,500+ tonnes across Fanuc, Sumitomo, Toshiba, Engel, Arburg, FCS, Haitian and other leading brands.
Do not guess your tonnage or settle for the first quote. Tell us your product, mould size and budget, and our experts will recommend the right machine.
📞 Call us today for a free consultation: +91 9810402210 | +91 9810802310
📍 Visit our Delhi facility to inspect machines firsthand: Street No-4, Plot No-2, Mundka Industrial Area, Delhi - 110041, India
✉️ Send your enquiry and receive a detailed quote within 24 hours: yashukatrading@gmail.com
🌐 www.yashukamachinery.com
Yashuka Machinery. Precision Machines. Trusted Partner. Since 2012.
